TOA

The D-001R is a line input plug-in module designed for use with the 9000 Series amplifiers. It has 2-channel unbalanced inputs of RCA jacks. Input signals to both channels are mixed together. The D-001R can process effect for TONE/EQ/COMPRESSOR to two...

Cardioid dynamic element.Diecast zinc body.Short-off type slide On/Off switch.XLR male connector.U.S. style stand adapter.Five year warranty.

The TS-923 Microphone is a dedicated component of the Infrared Conference System's Chairman unit and Delegate unit. Its mic head is equipped with an illuminated display ring that allows the status of the units in use to be monitored at a glance. Its...

,requires two gang deep enclosure (supplied by others)Two-way, half-duplex communication using any 25V wall/ceiling speakerPrevents incoming calls by pushing a privacy switch

The D-922F is a 2-channel microphone/line input module designed for use with the D-901 Digital Mixer, etc. It is equipped with XLR connectors. The D-901\'s 4-pole DIP switch is used to set the input sensitivity, phantom power supply, and ground lifting.

The D-922E is a 2-channel microphone/line input module designed for use with the D-901 Digital Mixer, etc. It is equipped with removable terminal block type connectors. The D-901\'s 4-pole DIP switch is used to set the input sensitivity, phantom power...

Angle Adjustment Bracket for HX-7 Series Loudspeaker, Set of 3, White By using three HY-60DW-WP brackets, the directivity angle mode of the HX-7W-WP

TOA&rsquo,s HY-60D Series Brackets are used to change the directivity angle mode of the HX-7 Series Speaker System to 60°, mode. Three pieces of the HY-60D Series are required to obtain 60°, mode of directivity angle. The HY-60DB-WP and HY-60DW-WP...

The TS-904 is a designed microphone for exclusive use with the conference units of the Infrared Conference system. Ring type In-Use lamp located at the microphone head permits displaying the operation status of the conference units.

The SR-SA3 is designed to be used to mount the Line Array Speaker on a speaker stand.

The H-1 is a cylinder-shaped, small flush-mount 2-way speaker that ensures quality sound reproduction. The mounting angle for its enclosure can be adjusted for up to 90 degrees.

The TOA BX-9F is back box to mount the TOA In-Wall Amplifiers W-906 and W-912.The BX-9F is for flush-mounting in any 4-inch wall.