Liberty Cable HDPIMF Liberty Brand HDMI In-Line Power Inserter

The HDPIMF HDMI®, Power Inserter is a device designed to power both sides (2‐,way) of an HDMI circuit. ,  , This short adapter with a power jack and included USB power supply and cable is ideal to insert power , into the HDMI circuit at a panel or plate junction. , This unit is a male to female 2‐,way adapter. , The typical , use pattern for this product is plugging into a passive coupler, such as a panel mount junction. , Then the , cable needing power is plugged into this unit. , This unit can be plugged into the front or the back of a plate , coupler, it does send power both ways to power both active cables in the circuit. , Active cables have introduced a new wrinkle in the audio visual spectrum. , Active Copper HDMI cables , require power at the receiving or Display end. , If the circuit ends in a wall plate coupler, there is no power , and the cable may not function. , This power inserter provides power at the wall plate. , Today, many of , the cables on the back side of the wall plate are also active, typically active optical cables for maximum , bandwidth over distance. , Active Optical Cablesrequire powered receptacles on both the send and receive , sides. ,  ,The power inserter delivers USB specification 5VDC 500mA power to both active cables in the , circuit. , The unit ships with a power supply and 1 meter USB A to 1.3mm power cable. , If a longer cable is needed, , a screw terminal to 1.3mm plug can be used with 18 AWG 2 conductor cabling.