Atlona

The Atlona AT-VCC-RELAY-KIT is an accessory for the Atlona Velocity Control System that provides conversion between IP control commands and relay / sensor signals. This Velocity Control Converter is very compact and can be placed anywhere a device...

The Atlona Etude? Sync (AT-ETU-SYNC) provides EDID emulation and Hot Plug Detect communication between HDMI sink and source devices. Part of the comprehensive family of Atlona 4K HDR integration products, it detects and corrects for signal integrity...

Atlona Technologies AT-VRL-SW Atlona Velocity Room License for Software Gateway

The Atlona AT-GAIN-NET is a networked audio interface card for the Gain 120 (AT-GAIN-120) power amplifier. It features an AES67 and Dante dual-channel audio bridge, adding the capability to accept two channels over a network from a Dante or...

The Atlona AT-VTP-TMK is a tabletop mounting kit for the AT-VTP-800-BL and AT-VTP-800-WH touch panels in the Atlona Velocity Control System. It allows convenient placement of a touch panel on a meeting table, lectern, credenza, or anywhere else...

The Atlona AT-VCC-RS232-KIT is an accessory for the Atlona Velocity Control System that provides conversion between IP and RS-232 control commands. This Velocity Control Converter is very compact and can be placed anywhere a device requires control and...

The Atlona AT-PS-POE is a 48 VDC mid-span power injector designed to send remote power to HDBaseT&trade, products that operate on IEEE 802.03af Power over Ethernet. When placed within an HDBaseT transmission line, it allows two PoE-powered products to...

48 Volt 3.12 Amp Power Supply The Atlona AT-PS-483125-C is a 48 volt, 3.12 amp power supply. This compact power supply measures 7.2" x 3" x 1.6" (183 x 76 x 40 mm), features an IEC power cable connector and a long, attached cable terminated for a two-pin...

The AT-PS-245-D4 Power Supply with DIN Connector from Atlona can be used to power select Atlona components with a 4-pin DIN input port. This adapter outputs 24 VDC, 5.0A power and features a locking connector.

The Atlona AT-RACK-1RU is a heavy duty, 1U rack shelf designed for installation of one or two Gain 120 (AT-GAIN-120) power amplifiers in an equipment rack. This rack shelf accessory is also ideal for side-by-side rack placement of many other Atlona...

The Atlona AT-OMNI-1XX-RACK-1RU is a 1U, full rack width shelf accessory that provides easy mounting and organization of two OmniStream Pro or R-Type encoders or decoders in an equipment rack.

The AT-IR-CS-RX is an IR Receiver Cable for PoE Extenders using a standard, 12 volt-based system. The 6 ft. (2 m) long, 3 pin cable features striped ends designed for quick connection with captive screw connectors (not included). The IR receiver is...