Professional Audio

The ST-EQ3 features a balanced bridging input, which may be connected unbalanced if desired. The output driver is 150 Ω, balanced, and is intended to drive unbalanced or balanced lines of 150 Ω, or higher impedance. Equalization is accomplished...

The ST-DA3 features RDL',s SupplyFlex power input configuration. The module will operate directly from floating 24 Vdc or bipolar dc power. If a jumper is connected between the PWR minus terminal and any module ground, the module power becomes...

The ST-CX2S features RDL',s SupplyFlex power input configuration for operation directly from ground-referenced, floating or bipolar 24 Vdc power.

For systems also incorporating subwoofers, the LOOP THRU output connects to an input of the RDL ST-CX2S Subwoofer Crossover. The ST-CX2 features RDL's SupplyFlex power input configuration for operation directly from ground-referenced, floating or bipolar...

The ST-CL2 is a high performance compressor/limiter designed to maintain a constant average output level and effective peak control over a wide range of input levels. The input and output are line level and each may be wired balanced or unbalanced...

The delay adjustment range for the ST-ACR2 is from 5 seconds to 50 seconds.

Two multiturn trimmers are provided. The SENS potentiometer adjusts the audio input sensitivity. A threshold LED facilitates accurate adjustment. The module can be set to trigger on signals between -65 dBu and -20 dBu. The DELAY control sets the time...

The delay adjustment range for the ST-ACR1 is from 0.5 seconds to 5 seconds.

The SR-TB10 terminal block kit includes a 10 position terminal block, polycarbonate label strip numbered 1 through 10 and mounting screws for use with the SR-4. This kit allows installers to build a customized product with screw connections using RDL...

The SR-4 is a universal module chassis that can mount to a backboard, wall or nearly any other support. It provides mounting for 4 STICK-ON power amplifiers or 7 standard STICK-ON modules. TX™, modules may also be mounted. There is ample space for...

SR-12A chassis can be mounted in a rack or on a backboard to provide mounting of 12 STICK-ONs.

SR-10 chassis can be mounted in a rack or on a backboard to provide mounting of 10 STICK-ONs