Professional Audio

Mounts to an HD series mixer / amplifier to prevent user access to the rear panel. The back-pack holds the power supply and provides a completely closed back for the installed amplifier.

Mounts to an HD series mixer / amplifier to prevent user adjustment or tampering. The power button and associated indicators remain accessible with the HD-ASC1 installed.

The TS-1D is intended to protect audio input and output circuits from the effects of transients induced on the audio lines.

The FP-VDA4 has two jacks in the bridging input stage. One jack is for the input signal, the other is a loop-through output of the source signal. If 75 Ω, termination of the input signal is required, the terminator (provided) is plugged onto the LOOP...

The normal gain setting is indicated for the trimming potentiometer. This setting produces a +4 dBu balanced output for a −,10 dBV unbalanced input. The gain is adjustable −,5 dB to +10 dB from the normal ga" Therefore, a +4 dBu output signal...

The normal gain setting is indicated for the trimming potentiometer. This setting produces a +4 dBu balanced output for a −,10 dBV unbalanced input. The gain is adjustable −,5 dB to +10 dB from the normal ga" Therefore, a +4 dBu output signal...

The mixer levels are set by RDL remote controls that connect directly to the FP-TPX3A through an RJ45 jack using standard twisted pair cable. The control ports on the mixer and remote controls are color-coded light blue to distinguish them from standard...

RDL FORMAT-A features superior audio performance that rivals or exceeds shielded wiring. Design simplicity, ease of installation, unsurpassed flexibility, automatic fused power, exceptional hum rejection, low noise, and low distortion provide designers...

RDL FORMAT-A features superior audio performance that rivals or exceeds shielded wiring. Design simplicity, ease of installation, unsurpassed flexibility, automatic fused power, exceptional hum rejection, low noise, and low distortion provide designers...

The FP-TP4PW is a four output power inserter compatible with RDL twisted pair products. It is powered from a 24 Vdc power supply using either one of the power jacks or the terminal block. Power jacks are provided at each end of the module to facilitate...

The FP-SPR1 is a single-channel module featuring three separate inputs. An input is provided in each conventional SPDIF format: BNC, phono and optical. Any one of these inputs may be used. A coaxial input has priority over the optical input. Three output...

The FP-RRB1 mounting kit contains two brackets to attach a FLAT-PAK module to a rear rack rail or to any flat surface.