Professional Audio

The D/DS-SH1M is used in applications requiring headphones of any impedance to be driven from consumer or professional audio sources. It is ideally suited to applications as diverse as language translation, museums, interview studios and music stores...

Radio Design Labs - RDL DS-SH1C ,Stereo Headphone Amplifier - 1/4", Headphone Jack - Decora Panel with User Level Control - Stainless Steel with Custom Labeling

The D/DS/DB-SH1 is used in applications requiring headphones of any impedance to be driven from consumer or professional audio sources. The D/DS-SH1 is ideally suited to applications as diverse as language translation, museums, interview studios and...

Audio Selector for SourceFlex Distributed Audio System - SS (Custom Labeled) (See Part ZCST-LBL for setup charge) The D SERIES-SFRC8L Audio Selector is a SourceFlex module for wall mounting in a room, providing source selection from up to 8 audio sources...

The D SERIES-SFRC8L Audio Selector is a SourceFlex module for wall mounting in a room, providing source selection from up to 8 audio sources. A numeric display shows the selected source. There are two line-level audio outputs on the rear of the unit,...

Room Control Station for SourceFlex Distributed Audio System - SS (Custom Labeled) (See Part ZCST-LBL for setup charge) The D SERIES-SFRC8 Room Control Station is a SourceFlex listening station for wall mounting in a room, providing source selection and...

The D SERIES-SFRC8 Room Control Station is a SourceFlex listening station for wall mounting in a room, providing source selection and volume control from up to 8 audio sources. A numeric display shows the selected source. There are two line-level audio...

The front panel of the DS-RT2 features two pushbuttons with two associated LEDs. Upon initial power-up, the OFF mode is selected. Touching the other button de-selects OFF and immediately selects ON. An LED adjacent to each button shows which mode is...

In a typical installation, the DS-RT2 may be used to turn an audio or video source on or off. To turn on an audio source, the DS-RT2 may be connected to an RDL ST-SSR1 or ST-RX2 Solid-State Audio Switch. For video switching, an RDL TX-MVX may be used. In...

The DS-RLC3 is designed to directly interface with RDL®, control modules which feature a 0 to 10 Vdc control input utilizing an external 10 kΩ resistive control, such as the ST-VCA3, RU-VCA2A and RU-VA6A voltage controlled amplifiers. The DS-RLC3 has...

In a typical installation, the DS-RLC3 is wired to an RDL VCA. The DS-RLC3 runs from the same power supply as the VCA. When power is applied, the DS-RLC3 defaults to the NORM level. One higher level, HIGH, and two lower levels, LOW and MIN, are then...

The DS-RLC2 is the ideal choice where levels are to be controlled from a single, or from multiple control locations, and visual level indication is desired.The DS-RLC2 is designed to directly interface with RDL control modules, such as the STICK-ON®,...