Professional Audio

The SPLITMix4 is a fully passive hybrid mixer that offers a wide variety of configurations. Mix 4 stereo input channels down to 1 stereo output, split a stereo input signal to distribute 4 stereo output channels, or combine the configurations for a wide...

Sometimes floor monitors are a problem. There isn\'t enough room for them onstage or someone sits in and can\'t hear the monitors or the drummer can\'t hear them well enough. Or perhaps it\'s a pick-up gig or a rehearsal and you didn\'t have enough time...

The DUALXDirect provides two independent high quality active interfaces that let you connect instrument, line, or speaker level signals to a mixer or other balanced inputs. Each of the high impedance 1/4", and XLR inputs (provided via...

",Hum", in an audio system is often caused by loop effects which act like antennas. These loops can easily pick up a 60 Hz (or higher harmonics) hum transmitted by electrical wiring. Typically, these loops are connected via grounds, more commonly...

PB 4×,4 features ART&rsquo,s &ldquo,4×,4&rdquo, distribution on the back of the unit &mdash, four of the eight rear outputs are 1.25 inches apart. This allows the user to plug in wide power cables and multiple wall wart devices, and still have...

Different condenser microphones specify different amounts of required phantom power. As a rule these ratings can range from 48 volts all the way down to 9 volts. Fortunately, there is some flexibility in terms of matching phantom voltage to your mic. A...

ART is proud to introduce the Precision Phono Preamp for those seeking to connect their turntable to PA or stereo in one quick and easy step. This standalone phono preamp interfaces both types of turntable cartridges Moving Coil (MC) and Moving Magnet...

Insert a ProMIX between the mics and the mixer. Each mic channel on the ProMIX has both phantom power and low-frequency cut selectable via DIP switches plus a level control. The balanced XLR line output can be connected to a mic input on the mixer and...

Dual Transformer/IsolatorThe DTI (Dual Transformer/Isolater) is a high quality totally passive audio interface that uses a pair of high performance transformers to totally separate input and output signal grounds, thereby isolating two systems and...

For those seeking a single channel preamp to improve the performance of ribbon and dynamic microphones, the RP1 Mic. This preamp brings out all of the nuances of a microphone before running into your recording interface or mixer through long cable runs...

The ART dADB dual active direct box acts as two independent, high quality active interfaces for connecting instrument, line, or speaker level signals to balanced inputs. The high impedance -inch inputs are buffered and converted by extremely low noise...

The AV Direct is the ideal input solution for any application where stereo iPods, laptop computers, consumer DVD players, consumer HiFi equipment or video machines have to be connected to a single XLR microphone level input. Unlike standard gender bender...