Radio Design Lab

The mixer levels are set by RDL remote controls that connect directly to the FP-MX3R through an RJ45 jack using standard twisted pair cable. The control ports on the mixer and remote controls are...

The message may be recorded once, at installation, then played back repeatedly. The message may be re-recorded at any time and is retained when power is removed from the module. The recording input...

The FP-MPA2',s low profile and compact size permit mounting in confined spaces and in various locations in equipment racks. The location of the input/output jacks permits high-density mounting...

The FP-MP1 is the ideal choice in most applications requiring a preamp. RDL',s exclusive low-noise discrete circuitry produces studio quality low noise performance in an economical preamplifier...

The FP-HRA rack mounts FLAT-PAK modules. This adapter fits 10.4" racks.

The FP-DFC2 has several unique features which set it apart from other professional converter devices: 1] All header information common to both formats is provided in the AES/EBU output, not just...

The FP-DCC1 outputs are regulated to provide 24 Vdc for input voltages normally encountered in 12 Vdc battery circuits. If voltage in excess of 15 Vdc (possible if a vehicle',s regulator should...

The FP-CT1 is a mounting bracket that fits the mounting track on FP-RRA and FP-RRAH rack mount panels. The set screw allows the installer to secure the bracket into position. An FP-CT1 can be secured...

Chime patterns are: single strike, double strike, triple strike, tone ring, manual strike, descending triple strike, eurosiren and multi-tone alert.

The FP-BUC2 circuitry features low-noise, low-distortion and excellent headroom and crosstalk performance and the superior audio clarity for which RDL products are known. The FP-BUC2',s low...

The FP-AVDA4 is the ideal choice in applications where consumer format audio and video signals need to be distributed simultaneously. Audio and video inputs and outputs are made on the top panel...

The automatic level control circuitry in the FP-ALC2 maintains a consistent −,10 dBV output for input signal variations as great as 25 dB. Yet the operation of the module is nearly transparent...