Professional Audio

The N-8031SB is a printed circuit board unit for the N-8031MS Flush-mount Hands-Free Master Station, You can make the master station suitable for applications using the N-8031SB in combination with the operation panel section to be prepared separately.

The HY-WM7W Speaker Wall Mounting Bracket is intended for mounting the HX-7W Speaker System to the wall by using in combination with the optional HY-VM7W Speaker Rigging Bracket.

The HY-VM7 Series Speaker Rigging Brackets are used to connect the HX-7B or HX-7W Speaker System to the optional HY-WM7B or HY-WM7W Speaker Wall Mounting Brackets or HY-C0801 or HY-C0801W Speaker Ceiling Mounting Brackets. It is also possible to suspend...

TOA Electronics WM-5265 UHF Hand-held Wireless Dynamic Mic is a vocal microphone, employing a fine, 636-666MHz Frequency Range powerful dynamic microphone unit.

with 64 ChannelsThe WM-5265 Wireless Microphone employs an dynamic microphone capsule and is suitable for any applications. Thanks to the PLL-synthesizer system, 64 different operating frequencies are made available. A high output power ensures stable...

Hoisting bracket used with SR-D8 active line array speakers.ex boltM6×,20 (with spring and plain washers, paint)TOA brought together it s proprietary line array technology and digital signal processing (DSP) technology in developing the SR-D8 active...

The EM-600 is an omnidirectional condenser microphone of only 28 mm (1.1",) in diameter designed for sound pick-up application. It can be flush-mounted into a ceiling, wall, or desk, making it unobtrusive. It provides clear and high-quality sound.

,The N-8050SB is a printed circuit board unit for the N-8050DS Door Station, You can make the sub station suitable for applications using the N-8050SB in combination with the operation panel section to be prepared separately.

The TS-919B4 is a Bridge unit for connecting four Wired Conference units of the TS-811, TS-911, TS-812, or TS-912. It connects to the conference unit with a Category 5 cable

The SR-TB4WP is designed to be used to mount the Line Array Speaker system SR-S4LWP or SR-S4SWP on a wall. The downward angle can be set to either 0゜ or 5゜, and the horizontal angle to up to 20゜.

S4.04 Handheld Dynamic Kit

,stainless steel faceplate (11 ga.), speaker, Xformer (1W @ 25V), connects to N-8400RS, requires two gang deep enclosure (supplied by others)The RS-480 is a substation to be connected to the N-8400RS 4-Wire Substation Interface Unit. Pressing a call...