Professional Audio

The F-1300 Series Speaker are compact two-way speaker systems designed for high efficiency, wide range, and high power input handling capability. These speaker systems can be installed in a manner ideal for the location and intended application.

Surface Mount Locking Enclosure for MW-41BT-AM Steel lockbox with key specifically designed for the MW-41BT audio interface. Built for indoor use it is water splash resistant with interior gasketFinish,,, Enclosure: 18GA Steel, Powder Coat Finish Black...

The HY-CW1WP is designed to be used exclusively to mount the HX-5 series speaker system to a ceiling. The speaker can be rotated 360゜ horizontally. It can also be tilted vertically up to 82.5゜ when suspended horizontally, and depending on the speaker...

The D-001T is a plug-in module designed for use with the 9000 Series amplifiers and can provide two independent balanced inputs. The D-001T can handle signals ranging from microphone level to line level by controlling their input sensitivity in 9...

The D-001R is a line input plug-in module designed for use with the 9000 Series amplifiers. It has 2-channel unbalanced inputs of RCA jacks. Input signals to both channels are mixed together. The D-001R can process effect for TONE/EQ/COMPRESSOR to two...

Cardioid dynamic element.Diecast zinc body.Short-off type slide On/Off switch.XLR male connector.U.S. style stand adapter.Five year warranty.

The TS-923 Microphone is a dedicated component of the Infrared Conference System's Chairman unit and Delegate unit. Its mic head is equipped with an illuminated display ring that allows the status of the units in use to be monitored at a glance. Its...

,requires two gang deep enclosure (supplied by others)Two-way, half-duplex communication using any 25V wall/ceiling speakerPrevents incoming calls by pushing a privacy switch

The D-922F is a 2-channel microphone/line input module designed for use with the D-901 Digital Mixer, etc. It is equipped with XLR connectors. The D-901\'s 4-pole DIP switch is used to set the input sensitivity, phantom power supply, and ground lifting.

The D-922E is a 2-channel microphone/line input module designed for use with the D-901 Digital Mixer, etc. It is equipped with removable terminal block type connectors. The D-901\'s 4-pole DIP switch is used to set the input sensitivity, phantom power...

Angle Adjustment Bracket for HX-7 Series Loudspeaker, Set of 3, White By using three HY-60DW-WP brackets, the directivity angle mode of the HX-7W-WP

TOA&rsquo,s HY-60D Series Brackets are used to change the directivity angle mode of the HX-7 Series Speaker System to 60°, mode. Three pieces of the HY-60D Series are required to obtain 60°, mode of directivity angle. The HY-60DB-WP and HY-60DW-WP...