Professional Audio

Designed to be mounted on the circuit board, the unit converts an input/output of unbalanced type into that of balanced type.

The TOA PC-580RU is an 8-inch ceiling speaker with a 25V/70V transformer. It is designed to be a high-performance and low-cost ceiling speaker for paging and notification applications, especially where retrofit of speakers in large facilities dictate...

The WH-4000P is a waist pouch to house a wireless microphone unit. Its elastic belt helps the pouch fit to your waist.

The MB-25B is a rack mounting bracket designed for 2-unit size.Rack Mount Kit for A-903/906/912MK2, M-900MK2, P-906/912MK2 and A-706/712/724 Series - (Black, 2U)

This is a Drywall Rough-in Kit made by TOA for F-122C/CU2, F-2322C/CU2, F-2352C/CU2, F-2352SC speakers.

The HY-CN1W is used to join 2 HX-5 series speaker systems, typically for the purpose of achieving better speaker directivity control in lower frequencies. Such directivity control helps achieve clearer and longer-rangesound reproduction in locations...

The HY-CN1B is used to join 2 HX-5 series speaker systems, typically for the purpose of achieving better speaker directivity control in lower frequencies. Such directivity control helps achieve clearer and longer-rangesound reproduction in locations...

Toa Electronics ACC-S5-Pouch for S5 Body-Pack Transmitter

The WB-2000-2 is a AA nickel-metal hydride (Ni-MH) rechargeable battery pack designed for exclusive use with the WM-5225 and WM-5265 Wireless Microphones, WM-5325 Wireless Transmitter, and WT-5100 Portable Receiver.

The MB-25B-J is used for side-by-side connection of 2-unit size components that are 210 mm in width in an EIA component rack.

The HY-BH10B Board Hanger Bracket is used to mount F-1000 Series or F-1300 Series speakers to a temporarily installed partition board. The speaker can be installed in either a vertical or horizontal orientation.

The YS-60B Mounting Band is primarily designed to be used to install the speaker on a pole. It is comprised of two bands.