Professional Audio

The TX-TP1PW is a single output power inserter compatible with RDL twisted pair products. The TX-TP1PW is powered from a 24 Vdc power supply using either the power jack or the detachable terminal block. A dual-RJ45 jack set is provided to connect remote...

The TX-RRB1 mounting kit contains a bracket to attach a TX module to a rear rack rail or to any flat surface.

TX-RA5 chassis is a single rack unit accessory which provides mounting for up to 5 TX Series products.

Use the TX-PSD1 to control RDL modules or other equipment with ground activated control inputs that permit a 24 V pull up.

In system design, various modules are frequently operated from a single power supply. Good engineering practice requires that the power wiring to each module originate at the power supply output. The TX-PD8X serves as the power source for each of eight...

Use the TX-PCR1 relay contacts to switch speaker lines or to control the logic inputs of other equipment with control inputs that may not be pulled up to 24 V. The TX-PCR1 is ideal to provide local speaker muting during an area page. The double pole...

The TX-PA40D is the ideal choice in many applications where a high quality, high-efficiency utility Amplifier is needed to drive a pair of 4 &Omega, or 8 &Omega, speakers. It is specifically suited to fixed-Gain amplification applications where Gain is...

Wherever an ultra-compact, high quality, high efficiency audio power amplifier is needed to provide reliability and unsurpassed versatility, the TX-PA40D is the ideal choice. Use the TX-PA40D individually, or combine it with other RDL products as part of...

The output driver provides two separate, identical output signals from the input signal or signals. This output distribution amplifier therefore allows the TX-MX2R to be used as a two-output audio distribution amplifier. If it is desired to distribute a...

Use the TX-MVX individually in NTSC or PAL systems, or combine it with other RDL products and various mounting accessories as part of a complete audio/video system.

Features: , , , * Matches Balanced 600 ? phone (or other line) into Mic or line input , , , * Dual outputs:Unbalanced Line-Level and Balanced Mic-Level , , , * Frequency Response: 20 Hz to 20 kHz (+/- 0.5...

The output driver provides a 150 _ balanced source to drive high or low impedance, balanced or unbalanced lines.